Hi everyone I have a problem with my machine it starts up with no problems but when it starts carving it stops in one place and it drills a hole all the way threw my wood and it shows a err code E06- 0303 Z Axis Stall and Z Axis Stall E06- 0313 can you guys please help with some info I would really appreciate it thank you this is the old carvewright machine
Hi everyone I have a problem with my machine it starts up with no problems but when it starts carving it stops in one place and it drills a hole all the way threw my wood and it shows a err code E06- 0303 Z Axis Stall and Z Axis Stall E06- 0313 can you guys please help with some info I would really appreciate it thank you this is the old carvewright machine
Hiya,
1) Are you using Designer 5 software?
2) What version of firmware is your machine?
I don't have a quick answer from your error codes. Have a question that would help on my end. Have you tried a different MPC or just the one giving you the problem?
Not sure myself of the words for the acronym but it is the file you create with you carving, load onto the flashcard and run on the carver
fat fingers, haven't figure out how or if we can edit posts. I meant "your carving"