Here's the link where you can buy it
http://store.carvewright.com/product...cat=304&page=1
Thanks Chief. I'm thinking you are in the Airforce? I served from 1976 to 1980.
Thanks for the Service to our Country.
Steve
Steve
Thank you as well for your Service. Actually I served in the Army and Air Force. Army from 1978 -1984, Air Force from 1984 - 2011. Retired CMSgt.
Steve aka "Chief"
Last edited by bjbethke; 11-21-2012 at 09:01 AM.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Making a rotary jig pattern has just gotten easier. Well it has been easier for some time. Go over and watch the video here http://forum.carvewright.com/showthr...suite-software, post #7. The rail sweep, now using that concept make yourself a rotary jig pattern by creating a line 6.75" in length. Click on sweep rounded, create your profile, click ok. You now have a pattern for your rotary jig. Save the pattern then follow ED's instruction for the jig and carve the pattern on the rotary jig. Add other patterns, text to your new pattern and you will be on a roll. Here is a quick lighthouse profile you can make in minutes.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
As another example here is the duck call I made a few post back, but this one was done using the rail sweep (sweep rounded, with line segment)
First image is done in designer, second image was one I created some time back, and third image is what it would look like carved.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Thanks Eddie! Had not put much thought into "on the round" and the new tools. Sounds like an easy route for many possibilities maybe..
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
I saw Ed did not have it listed on the store any more.. You might have to private message him as I am sure he is still making it and selling..
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Will do, thank you!