I'm placing this here so the pattern hit the "sharing" thread.
AskBud
I'm placing this here so the pattern hit the "sharing" thread.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Here is Betty Boop, made with the Recessed Circle Pattern as a my surface.
AskBud
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29
Not sure if I posted this before but recently found it and tweaked it a bit with PE. I'm attaching the PNG file for it zipped up so you can change any part of it for your project. The PTN is to large for the forum anyways.
Lin
Another wordart pattern. PNG, PTN and MPW are all in the zip file
Lin
One last pattern before I get too busy to think again...PTN,PNG and MPW are all in the zip file.
Lin
This is from a scan I did awhile back and put a few hours of work into, maybe some of you can use it.
Hi Lin, Nice patterns thanks for sharing.
have a great day ~ Ray
The zip has the pattern
Anyone have a jagged edge board mpc? need to make a man cave sign
Thanks Shawn
Posted this png a while back so people can play with it, think someone used it for a project.
Enjoy if it works for you.
http://forum.carvewright.com/showpos...&postcount=187
I'm a professional toothpick maker.
TK Designs
Worked great badger thank you!!
Shawn