Here's the link where you can buy it
http://store.carvewright.com/product...cat=304&page=1
Printable View
Here's the link where you can buy it
http://store.carvewright.com/product...cat=304&page=1
Thanks Chief. I'm thinking you are in the Airforce? I served from 1976 to 1980.
Thanks for the Service to our Country.
Steve
Steve
Thank you as well for your Service. Actually I served in the Army and Air Force. Army from 1978 -1984, Air Force from 1984 - 2011. Retired CMSgt.
Steve aka "Chief"
Making a rotary jig pattern has just gotten easier. Well it has been easier for some time. Go over and watch the video here http://forum.carvewright.com/showthr...suite-software, post #7. The rail sweep, now using that concept make yourself a rotary jig pattern by creating a line 6.75" in length. Click on sweep rounded, create your profile, click ok. You now have a pattern for your rotary jig. Save the pattern then follow ED's instruction for the jig and carve the pattern on the rotary jig. Add other patterns, text to your new pattern and you will be on a roll. Here is a quick lighthouse profile you can make in minutes.
As another example here is the duck call I made a few post back, but this one was done using the rail sweep (sweep rounded, with line segment)
First image is done in designer, second image was one I created some time back, and third image is what it would look like carved.
Thanks Eddie! Had not put much thought into "on the round" and the new tools. Sounds like an easy route for many possibilities maybe..
I saw Ed did not have it listed on the store any more.. You might have to private message him as I am sure he is still making it and selling..
Will do, thank you!