Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: Requested Features for next version

  1. #11
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    I have mention this before, variable "angle on draft", just like the custom feather.
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  2. Default

    Laser attachment!!!

  3. #13
    Join Date
    Feb 2017
    Location
    Brentwood, CA 94513
    Posts
    18

    Default

    I would like to see the STL import software be able to import files greater than 99000 byes. There are a lot of great carves available that exceed the CW import capability. And yea I do reduce the file but there have been a few cases where the results do not do the CW justice.
    I also agree with the previous post for measurement.

  4. #14
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Quote Originally Posted by GuyT View Post
    I would like to see the STL import software be able to import files greater than 99000 byes. There are a lot of great carves available that exceed the CW import capability. And yea I do reduce the file but there have been a few cases where the results do not do the CW justice.
    I also agree with the previous post for measurement.
    Curious... is it the limitation of the size of the memory card memory?

    If that was the case.... A Extended Memory, Memory Card....

    AL Who
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  5. #15
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Guy T, You may have missed it.... The LASER OPTION was available for a short time but could only be used with the QC and the 18 pin FFC as it supplied the 14.2 Giga Watts that it needed... When they went to a 14 pin FFC they deleted that option...

    It was rough on the Bit Flag....

    Here is a picture of it operating in 2008... It was only available to buy on one day... 4/1/2008.

    AL Who
    Attached Thumbnails Attached Thumbnails lightsaberbit.jpg  
    Last edited by Digitalwoodshop; 05-10-2019 at 04:31 PM.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  6. #16
    Join Date
    Feb 2017
    Location
    Brentwood, CA 94513
    Posts
    18

    Default

    Al Who; I have not run into any memory card limitations. The largest file (20 hour carve) took significant space but left room for several more carve files.

  7. #17
    Join Date
    Mar 2008
    Location
    Beardstown, IL
    Posts
    235

    Default

    Some of the STL files that are over sized come back as corrupt file.
    thanks so much!
    karl

  8. #18
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,314

    Default

    LOL!!! You are so going to confuse people with this! LOL!!

    Quote Originally Posted by Digitalwoodshop View Post
    Guy T, You may have missed it.... The LASER OPTION was available for a short time but could only be used with the QC and the 18 pin FFC as it supplied the 14.2 Giga Watts that it needed... When they went to a 14 pin FFC they deleted that option...

    It was rough on the Bit Flag....

    Here is a picture of it operating in 2008... It was only available to buy on one day... 4/1/2008.

    AL Who
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

  9. #19
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Only on April Fools DAY.... in 2008...

    AL Who... Troublemaker...
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •