Hello,
This wall clock project features a beautifully detailed strawberry carving motif for you to enjoy! The sample was simply stained and clear-coated but will lend itself nicely to a painted finish, or even a paint and stain combination, as well.
The project uses just the 1/16" Carving Bit and the 1/8" Cutting Bit. No other bits are required.
Finished dimensions of the Strawberries Forever Clock are approximately: 1.5" deep x 10" wide x 17.6" tall.
Main items you will need:
1) The Project Files (included):
• Strawberry_FRONT_Panel.mpc
• Strawberry_REAR_Panel.mpc
2) Boards with the following dimensions:
FRONT: 0.75" x 11" x 26"
REAR: 0.75" x 11" x 26"
NOTE: Do not use boards that are smaller than specified above unless using an appropriate jig.
3) A 5-7/8 inch clock insert (3.25" dia. mounting hole). I used model #15341 from:
https://www.klockit.com/catalogsearc...2F8%22+clock#1
4) Sandpaper, sawtooth picture hanger, glue, stain and/or paint and clear finish
5) A Dremel-type rotary tool with assorted sanding wheels and bits to sand small details. A spindle sander and small belt sander can also be handy to speed up preparation for finishing.
Apply your choice of finish. Here’s what I used on my Strawberries Forever Clock sample made from Select Pine:
• Apply Rust-Oleum Ultimate Stain - Wheat
• Several coats of gloss Krylon Clear Acrylic spray