mr1234
Hi Mike,
This is a Free Spell Check that I keep on my PC's and Lap Tops
It works fine on the CW Forum, plus every place else I've tried.
http://tinyspell.numerit.com/
mr1234
Hi Mike,
This is a Free Spell Check that I keep on my PC's and Lap Tops
It works fine on the CW Forum, plus every place else I've tried.
http://tinyspell.numerit.com/
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
LHR and Ron can make claims all day long. Of course, we are both partial to our own designs. They are both, in fact, good designs. The true test will be when customers or an impartial third party makes the comparison.
Can't wait to get some customer feedback on the new spindle!
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
I have an order in for the Carve Tight unit. I own Ron's QC unit with all collets. My Z truck is working great with Ron's unit. I will not be returning the old unit. It is worth $18.00 to me, (The rebate is $40.00 - $22.00 return shipping); it would be nice if the Carve Tight unit was offered without the tools. That would have saved me another $12.50.
I will let you know what I think about the LHR unit.
I do not use the Blue Thread Locker with Ron’s QC chuck; I find it is not needed. Hope I do not need it with the LHR unit.
Using Designer Version 1.187
Donations are always welcomed, thanks – send a check to my PO Box 652
BJB
PO Box 652
Yellville,AR 72687-0652
PM me for my e-mail address.
Just received the new Z truck assembly. Will install it as soon as I get home.
I'll report back soon.
Lee
Pop's Fix It Shop, We won't make it any worse.. Using "A" machines 1.187 1.188 ,2.007, 3.103
2 Machines no waiting.
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
Al,
There is a good video at the bottom of this link.
AskBud
http://www.carvewright.com/cms/carvetight
AskBud Downloads =>> CLICK HERE
Lesson added 7/15/2012 Titles begin with "2D-3D Build a Pattern-Part-3"
CW Vacuum Head Project =>> CLICK HERE
AskBud Home Page =>> CLICK HERE <<=PC lessons or CW lessons
More than 1250 AskBud patterns vvv-CLICK BELOW-vvv
http://store.carvewright.com/manufac...ufacturerid=29