problem carving dimension

[gcioffi]

hi help me
Done this work but did not come with size of the project.
The project is 30x30x1.8 cm 34x32x1.8 the table.
I put the other under the table so as not to ruin the machine.
The table is larger and therefore there are problems, because the design comes the goal of size?

[Jeff_Birt]

Take a look st the December and April Tips&Tricks: http://www.carvewright.com/cms/tips-and-tricks

They have a good write up on the various setting of 'Stay Under Rollers' and using various carrier boards/sleds (I think you are referring to them as table, but perhaps your are saying table to mean board?).

[Kenm810]

gcioffi,


Is it possible you didn't add 8.89 cm
to each end of you project board,
causing the pattern to be carved smaller

The Tips&Tricks: Jeff mentioned will help explain

[gcioffi]

then each project must have at least 8.9 cm to the right and left?
8.9 is the minimum distance


thanks

[TCboy]

Per reprimere il progetto da restringere quando lei sceglie di stare sotto i rulli, lei deve aggiungere almeno 8,89 cm all'asse che lei colloca nella macchina. Così, se il suo progetto è 12 cm nella lunghezza che lei dovrà collocare una 21 asse di cm nella macchina.

[TCboy]

Maybe that will help explain.

[Eagle Hollow]

Per reprimere il progetto da restringere quando lei sceglie di stare sotto i rulli, lei deve aggiungere almeno 8,89 cm all'asse che lei colloca nella macchina. Così, se il suo progetto è 12 cm nella lunghezza che lei dovrà collocare una 21 asse di cm nella macchina.

Hey Alex...That's easy for you to say!

[Audie]

I second what Atauer2 said.....I think! LOL

[gcioffi]

then each project must have at least 8.9 cm to the right and left?
8.9 is the minimum distance


thanks

[TCboy]

there are several free translators on the web that you can use. I simply typed in the information in english and translated it into italian. One site that i find useful is www.freetranslation.com. Try it out sometime.