Hello,
This Cupid Heart Box is the perfect gift for a loved one! The unique lid configuration features an integrated “Cupid Arrow” which fits into matching recessed slots in the heart box body when closed.
NOTE: The decorative carved pattern in the lid matches a previous Project of the Month - “The Heart Hand Mirror” (January 2016) and makes a great companion piece!
The project uses just the 1/16" Carving Bit and the 1/8" Cutting Bit. No other bits are required. Overall dimensions (including arrow) are about: 5.375" x 7.5" x 3.5"
Main items you will need:
1) The Project Files (included):
• Heart_Box_Top.mpc
• Heart_Sections.mpc
2) Boards with the following dimensions:
Heart Box Top: 0.75" x 7" x 21"
Heart Sections: 0.75" x 7" x 24"
NOTE: Do not use boards that are smaller than specified above unless using an appropriate jig.
3) Self-stick silicon or cork pads for box bottom
4) Sandpaper, glue, stain and/or paint and clear finish
5) A Dremel-type rotary tool with assorted abrasive attachments to aid the sanding process. A spindle sander and small belt sander can help speed up sanding/surface prep.
Apply the finish of your choice. Here’s what I used on the sample Cupid Heart Box made from Select Pine:
• Applied one coat thinned Bulls Eye SealCoat (50/50 SealCoat and denatured alcohol). Sanded when dry.
• Applied Rust-Oleum Traditional Cherry stain to the box lid
• Applied several light coats Krylon Clear Gloss
• Applied several light coats Krylon Clear Satin overall
• Sanded arrow and fins very, very lightly with 400-grit sandpaper and painted the fins and arrowhead heart point with a Gold Paint Pen