Results 1 to 4 of 4

Thread: Identifying a carvetight spindle

  1. #1

    Default Identifying a carvetight spindle

    I can't remember where I read it...but the "newer" machines already have the CarveTight spindle. Is this true?

    How can I determine what "version" my machine is and if, in fact, it has the upgraded spindle?

    Thanks!!!

    Click image for larger version. 

Name:	20180421_184644.jpg 
Views:	24 
Size:	2.84 MB 
ID:	85895

  2. #2
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,983

    Default

    I believe you have the latest and greatest.... And it should be a CarveTite. The Standard for a few years now.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  3. #3
    Join Date
    Dec 2014
    Location
    Kaukauna, Wisconsin
    Posts
    784

    Default

    If you are using a t handle hex wrench to loosen the screw to remove the bit, you have a carvetight. If you have a quick chaange design, where the bit is in a holder that you snap into the spindle and use a wedge type tool to remove that is the older style spindle design.

  4. #4

    Default

    Yep..it's a T handle! Thanks!!!!!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •