It appears that you actually have 3 carve regions. Outer set to a depth, middle with depth set to 0, and an inside carve region that you want recessed. Group the middle and the inside carve regions. Select the middle carve region, right click and select "Clip Carving: Exclusive". You can play with the heights and depths to get the results you want.
EDIT: Grouping tells the Designer which carve regions are affected by the clip.
Last edited by SteveNelson46; 02-11-2018 at 05:56 PM.
Steve
Attached is a copy of the file I am working with
Carving Region Example.mpc
Steve Nelson,
Thank you for your quick response and it worked, Thank you very much.
Group "arc 4" and "arc 2". Apply Clip Carving: exclusive to arc 2. If you want arc 5 recessed also move it into the group.
Steve