Apparently this didn't work I now have 2 machines with their original brains back in place and x stall and cut motor fails the user test on both machines............
Anyone need two large door stops?
Apparently this didn't work I now have 2 machines with their original brains back in place and x stall and cut motor fails the user test on both machines............
Anyone need two large door stops?
Brent
A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
OS X Yosemite
Woodwork is what I do to pay for my tool addiction.
I would inspect the X Termination Boards as the Cut Motor On Off goes through this board at Q1. And the X Drive goes through the same board...
Look for burnt or loose parts and plugs.
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
I will check them both, may have time tomorrow.
Picked up a compucarve with 6hrs on it so I am back in business.
will keep me carvin till I get another one working.
Just not clear why swapping contolers would fry both boards when doner machine
only had a slippy Y belt.
Thank You!!!
Brent
A,B machines, PE,probe,conforming vectors, centerline, 2d,3d,stl and dfx imprt, rotary , 3.xx, Pattern Sculptor
OS X Yosemite
Woodwork is what I do to pay for my tool addiction.