Results 1 to 10 of 10

Thread: Easy build chest in cedar

  1. #1
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,927

    Default Easy build chest in cedar

    This was the test piece used to validate the easy build chest instructions (linked below). I used the 2nd variation with no gap at the top of the chest. It is raw cedar with a poly finish after at very quick 120 grit sanding (I hate finishing). I like the rustic look but the pattern works really well in pine/alder for painting if a more sophisticated look is desired. Just remember to use a sealer or primer first.

    I used 16 separate carvings to decorate the piece. As stated at the beginning of the pattern thread, you don't need a CW to build this but it does amp it up a level or two. A one of a kind piece, unless you make one using the same patterns .

    Pattern is very easy to build, versatile and can be modified in almost every aspect.

    http://forum.carvewright.com/showthr...llenge-contest
    Attached Thumbnails Attached Thumbnails unfinished cedar chest.jpg   cedar chest 1.jpg   cedar chest 2.jpg   cedar chest 3.jpg  

    cedar chest 4.jpg  

  2. #2
    Join Date
    Mar 2007
    Location
    Unionville, NY
    Posts
    298

    Default

    Very nice piece. Thanks for sharing

  3. #3
    Join Date
    Apr 2013
    Location
    Cornwall, Ontario, Canada
    Posts
    1,343

    Default

    Oscar it's gorgeous!

  4. #4
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,927

    Default

    Suzanne, Mike,

    Thank you. Fun little build. I know this is not fine woodworking but as a starter piece or just learning woodworking its fine. A fine piece of furniture takes me a week to build with all the dovetails and mortise and tenon construction plus the attention to detail. This you slap together in a day. I know this look is not for everybody but selection of the species of lumber used makes a big difference in final look (plus stain or paint).

  5. #5
    Join Date
    Dec 2011
    Location
    Spring Arbor Michigan
    Posts
    1,274

    Default

    Very nice work and the instructions look great also! Thanks for sharing.
    Jeff

  6. #6
    Join Date
    Sep 2014
    Location
    South Plainfield NJ
    Posts
    407

    Default

    Really nice work looks great. I might have to give this a shot.

  7. #7
    Join Date
    Jun 2013
    Location
    Southeast Idaho
    Posts
    641

    Default

    Hi Oscar,

    It did turn out wonderful! Did you use fence pickets, it has that rustic look that is so popular now?

  8. #8
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,927

    Default

    Thanks all. DianMayfield, almost. They were Lowes cedar boards. They were heavily warped and a little difficult to work with. If I was not going for the rustic look I would have planed them flat but for this project it didn't matter much. You can see a little bit of the unevenness in the pictures. You can clean that up with sanding and hand planing if you want a more refined look (though a lot of work).

    Be careful with fence pickets since many are treated with chemicals to make them rot resistant and not very human healthy for in the house.

    All. Post pictures when done so I can get inspired as well.

  9. #9
    Join Date
    Sep 2010
    Location
    Hereford, AZ
    Posts
    236

    Default

    Great job!!! Thanks for sharing and for doing this for other forum members.

  10. #10
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,927

    Default

    Hope you have a chance to build it. If nothing else it makes a quick but nice little gift.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •