Looks great, Kevin. Did you stain and wipe it? Also what settings did you use?
George
I used a brush to stain it and I had the depth at .250 and height at 300 and I inverted the PTN. I used 2 different stains so it would stand out.
Pretty darn good Kevin!
By looking at Your carving I see nothing wrong with it at all ..good job.. maybe you need to step up the game and do a lithophane !
Very impressive, are litho coming next. Which one do you prefer?
Thanks everyone I am kicking around doing some lithos I have never tried doing one. I have to figure out the whole lighting the shadow box thing. what to use and where to buy.
Looks better than some I have attempted.
Mike
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.
Nice job, Kevin. The stain really has brought out the detail you put into the carve. Well done!!
John
www.jdmwoodworks.com
Facebook Page: click FB button on web page
Bessemer, MI (shop location)
Lake Gogebic, MI (where I hang my hat)
"He who wants by the yard, but gives by the inch, should be kicked by the foot"...
The stain really does bring out all the detail. I like to use a brush and leave the stain heavy in spots and light in others.