Multiple errors

[gwizpro]

Hi all,

Here is some info first.
C machine - just ran a simple project , then started second project and
received a clear board sensor. Cleaned sensor. Restarted.

Now received a z axis stall - cleaned and lubed rails - checked for free movement

So, now have 2 errors that continue.

Ran user test for x y and z and they performed perfectly.

Re formatted card and reload project.

Received board sensor - I pushed enter key and z axis was low and snapped bit.

New bit, New card new project and still receive the rrors.
Z axis stall and clear board sensor.

Could it be the cable or something more. Cable seems common to both errors.

Thoughts

[cestout]

Sounds like the FFC cable or it's connections. Both the board sensor and use the FFC cable.
Clint