Originally Posted by
bergerud
What I do not understand is why the machine bobs for the sliding plate after it fails to touch at the brass roller. Why air bob at the sliding plate when you know you cannot reach it? It makes sense to me to just ask for the board thickness after failing the touch at the brass roller.
I am like PSQRD, The bulb isn't at it's brightest yet. There is just a couple of things I don't totally understand but if you end up doing an in depth instruction sheet, maybe with photos, that would be awesome. I think it is great that you have shared as much as you have so far.
Mike
All Gave Some,
Some Gave All.
My computer configuration and software used:
Gigabyte GA-990XA-UD3 Motherboard, AMD FX 6-core Processor Black Edition, 32 Gig DDR 3 Ram, Gigabyte HD 6450 Video Card with 1 Gig DDR 3 ram, Windows 10
Designer 2.007, Designer 3.102, Pattern Editor, Centerline, Conforming Vectors, 2d Tools, 3d Tools, DXF Importer, STL Importer and Rotary Jig.