Yet another Vector Plaque! Uses both 60 and 90 degree V-Bits.
Plaque-2.mpc
edit: OOPS.. I missed a line!
Yet another Vector Plaque! Uses both 60 and 90 degree V-Bits.
Plaque-2.mpc
edit: OOPS.. I missed a line!
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
Dave,
Thanks for the comment! There is no one single repository. Wish there was! I just search for artwork while I am traveling and grab what I can. If one wants to look for brand name art 'BrandsOfTheWorld' is a great place. I also have tons of artwork that I have purchased over the years. I wish I could point you to one place but sorry there are TONS os places.
BTW, the bits assigned to any of the vector MPC's I posted can be deleted and/or altered any way someone wishes.
Side note: 'Yo Adrian! 800 Posts! and climbing!'
I may pass out!
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
I use the mouse when I am drawing the vectors, but change to the pen when I do editing or sculpting. I do not have the DXF importer, so not much use in making the vectors patterns for me.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
Eddie,
You can still use the files I uploaded. Once they are vectors anyone can use them. Also, just remove the bit assignments and you will have a basic line drawing to work with. I can convert DXF's to vector drawings if you want. Email me the DXF and I can email back the vectors. It would save a lot of time rather than tracing.
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
Thanks Steve, I knew I could still use the patterns you made. I was just mentioning the fact I make so many vectors, some would look good as plain vectors. MoI3D has the ability to read and save as DXF. But I do not have the ability to import it to designer. Thanks for the offer, I may take you up on the conversion.
Using Designer 1.187, STL importer, Center line, conforming vectors, scanning probe/PE, and the ROCK chuck.
Eddie
I downloaded alot of patterns off this post, some nice things thanks Steve.....I need alot more wood!!!
Glad you can use them.
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
Rooster cutout from Vectors.
Rooster.mpc
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
Ride'Um Cowboy cutout from Vectors.
RideUmCowboy.mpc
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac
Love Plaque.. Put your best 'Sweet Nothings' here!
LovePlaque.mpc
Steve
Centerline
Pattern Editor
Conforming Vectors
DXF Importer
STL Importer
2D Advanced Tools
Designer 1.187, 2.007 and **NONE** on Mac OS 10.15.6 and Windows 10 via Parallels on Mac