I have been experimenting with solar power in my shop . I was wondering if any one else had tried running the carvewright
on solar and if it would harm the machine to run it on a modified sine wave . Right now I only have 400 watts of solar and 2 -12 volt 94 amp hr. batteries feeding a 12 volt to 120 volt 1500 watt modified sine wave inverter I have no problem supplying power to my lights and a fan and I have used it on a quarter inch drill and it seems to keep my batteries charged too. If any one has solar I sure would like to hear from you . I live in Florida so we have plenty much sun all year .