Last edited by kenrik; 07-01-2010 at 07:08 AM.
that seems to work very well, I would probably get one for each of my machines, when and where are they availiable
steve
Have you had any problems with the add-on being in the way when the spindle goes to the bit plate during the "precut" sequences?
The Toymaker
One can not move forward until they leave the past behind
I would not suggest trying to mount heavy things to an axis, the mchine's software is not expecting to have to account for it, YMMV. Also, the machine would have to have the top cover removed as shown in the video...
Happy carving , Jeff Birt
Check out www.soigeneris.com for CarveWright Accesories.
Home of the 'Carving in the Dark' back lit LCD kit!
How hard is that to make? And is it high enough to miss the bit plate?
Custom Stadium Coin Racks for displaying Military Challenge Coins, GeoCoins and the like- http://www.etsy.com/shop/stadiumdisplays
OR http://shop.ebay.com/stadiumdisplays...&_trksid=p4340
Very interesting
Francois
Beautiful Laurentians, Québec, Canada
Designer V1.161
I like it... Would love to see a video of it doing the bit plate....
AL
Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.
Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074
www.PoconoDigitalWoodshop.com
www.AccountabilityTag.com
The placement of the vacuum tube will be a factor if you are using a sled. Also if you want to use large router bits like the ogee.
May you be well, may you find happiness! : - )
"Exaggerated self-importance is deemed an individual fault, but a racial virtue." From Kelly Millar
Is there any adjustments on this for the different tools?
CarverJerry
ver. 1.188 Win 7- 64b with 6 GB ram @ 2.8Ghz and dual 1Tb hard drives. Rock Chuck & Ringneck vacuum system hooked up to a Harbor Freight large vacuum. Center line text, conforming vectors.
cool shoe. i would think you could go down in size on the collection pipe to say 1/4" and it still pick up everything and save on weight. can you still carve 14.5" wide with it? guys appearantly it misses the bit plate cause he's carvin away with it.