BJB's CarveWright Patterns

[bjbethke]

I need to sell a few CD and DVD’s to update my equipment. BJB

I work on Donations, I leave the donations up to the pepole that ask me to make a pattern for them. (They send me a “PM” with there E-mail address.) Except my CD and DVD's; I have a Minimum of $50.00 for the CD's (about 200 pattern files) and $100.00 for my DVD's (about 500 to 600 pattern files) I fill the disk with data (max data per disk). I use the Designer 1.187 version; all of CW's new updated programs can open my PTN files.

Most people just send me a donation of about what they pay for patterns at the CW Pattern Depot ($10.00 to $20.00); the most I received was $100.00, the guy needed to make over 100 carvings. Some people don’t send me anything. I’ll leave it up to you.

The CD and DVD's are the best deal; about 25 cents each. If you let me know what type of carvings you like to make, I think I can come up with some great line drawings. It works best to start with a line drawing to make the Grayscale image that the CW “Z” Truck uses to carve the pattern, it reads the Binary code to make the carving.


0000=transparent, 0001=Black, 0255=White and 0128=center of the carving depth. That makes 256 shades of gray in the Grayscale Image.

Each of my pattern files have 6 files in them, like the sample attached. Thank You, BJB
The 6th file is the MPW file, that file is not locked with a code and you can change the image in the designer program.