Challenge coin display box Plans
Enclosed are the plans for a challenge coin display box. Very simple and basic level project (no advanced joinery, butt joints galore). You will need a table saw (or straight cutting tool), drill, 1/4 drill bit, sand paper, tape. Materials will be lumber (two species look great), 1/4 in dowels, glue, poly (sealant). Dimensions are based on 3/4 lumber. Plans will have to be adjusted for different dimensioned wood. In the plans I change the height of the box (4 inches instead of 5) and where the dowels are located. Please let me know if there are any corrections that are needed.
MPC is in Designer 2.0 format (sorry).
Important: Please ensure and validate the tabs and cutting depth per path are set correctly.
Off topic: Is there an easy way to change a designer 2.xx mpc to designer 1.xx mpc?
Reply With Quote