If I make sled for a project I'm working on can it be wider than the project?
Mike
If I make sled for a project I'm working on can it be wider than the project?
Mike
Mike,
Your sled can be up to the maximum carving width (14.5") of the machine.
ISSUE 7 April 2008 – Carving Jigs – Carrier Boards, Sleds and Rails
Last edited by Kenm810; 11-16-2008 at 12:47 PM.
Ken
Ver 1.182 on XL Pro plus Ver 1.164 and 1.175 on Windows 7 Ultimate
It Never Fails * Till * You Say It Never Fails
Thanks Ken
(14 5/8") is about the max but (14 3/4") will fit if needed.Your sled can be up to the maximum carving width (14.5") of the machine.
LG
Last edited by liquidguitars; 11-17-2008 at 10:10 AM.