Making a 3 foot x 3 foot project

[addictivewoodworks]

Hi all. I was wondering how I make a 3 ft. x 3 ft project. I was going to do it on 3 boards that are 12" wide by 36" long and glue up the three boards. I have never attempted to do this. Is it possible and what do I need to know Thank you in advance

[oscarl48]

That is exactly how I would do it, though the largest I have carved is 24 inches across. Mine was a two board glue up. I don't think I did anything special for mine. Just cut off the extra edges off on the table saw and glued them up. They lined up well for my project.

Hopefully folks with more experience will share their experience.

[fwharris]

Hi all. I was wondering how I make a 3 ft. x 3 ft project. I was going to do it on 3 boards that are 12" wide by 36" long and glue up the three boards. I have never attempted to do this. Is it possible and what do I need to know Thank you in advance

This is the information on that .... https://support.carvewright.com/tuto...ge-tiled-sign/