1.121 is OUT !!!! Flash Radio Traffic

[Digitalwoodshop]

This is NOT an OFFICIAL Announcement but.... 1.121 is OUT !!!!!!

I made a separate thread as I am sure some are sick of reading all my Anatomy posts...

The Quick and Dirty is I installed the New Z Bundle with the Probe data now entering that unused jack on the left side. Part of the Left Lid Switch wires.

Installed everything today and BUMMER it didn't work... It came up in Scan Area and the Probe showed CLOSED on the Sensor Data...

I called LHR expecting to leave a message but got Henry.... They have 2 Techs answering the Phones on Saturday.... WOW....

I gave him the scoop and he said 1.121 would fix that... WOW....

__________________________________________________ ____________

http://www.carvewright.com/downloads/cw_fw_1_121.mwm

Please download the firmware above to a known
location on your computer. Then open the Designer and insert your
flash card into the programmer. Select the File->"Flash Manager...",
when the Flash Manager opens click the Firmware button. Now click
the Choose button from the firmware dialog, and a file browser window
will open. Browse to where you downloaded the firmware
file and open it. The firmware will now be uploaded on to your card.


After you put the card back in the machine, turn the machine on. It should say “Scan Area”. Hit option “0”. Scroll down to number 5, User Options. Scroll down to Scan Probe. Make sure it is on “cover” instead of Z truck.

Press stop until you get back to main menu. It should say Project Menu

__________________________________________________ ____________

Did everything and followed the steps.... You now get the option to select the old Z Truck Probe Connection OR the NEW COVER Option. That did it.......

THEN.... GET THIS..... JUST HAD TO SEEEEEE.....

They FIXED the CENTER OF BOARD SPEED PROBLEM..... It measured the Board like it was in a HURRY....

THANKS LHR......


It is up to YOU if you want to load it....

GOOD LUCK...

AL

Flash Radio Traffic was a Navy Term to describe VERY IMPORTANT Radio Traffic, like the Nuke's are inbound.....

[ruggybear]

Checked for updates from Designer Help tab and found no update to 1.120 that I am using.

[pkunk]

It's just a firmware update. I did it for 1 card and we'll see how it works. Don't everyone jump on this at once. Wait a tad & read the comment of those who've tried it.

[liquidguitars]

I made a separate thread as I am sure some are sick of reading all my Anatomy posts...

not at all!

LG

[newcarver]

I downloaded the firmware update and installed it to the mem card. It did fix the slow measure feed, other than than, i will post any other improvements or detriments as they appear.

[Digitalwoodshop]

The fast measurement is reason enough to down load it. I really like it.

AL

[BobHill]

Thanks for the information, Al. I downloaded and installed it also onto my Flash card.
Bob

[Digitalwoodshop]

Bob,

If I had a machine that works I would be cutting now... Thanks to JB Weld I will be back up in the morning. Worked a whole 6 hours after being down 2 weeks...

AL

[BobHill]

Better living through chemistry, Al <g>. I love all that stuff that J.B. sells.
Bob

[Gman_Ind]

She ain't pretty but she is allright! get 'R dun.