Results 1 to 4 of 4

Thread: carve hole within a hole

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default carve hole within a hole

    Hi i want to carve a smaller deeper hole inside a shallow larger size hole. The larger hole would be 1/16" deep and the smaller hole would be 1/2" deep. i know i could do it by carving the smaller hole and then draw a larger hole around the smaller and use the tool to cut the shallow area around the carved hole. Is there a way to carve both holes so i don't have to do a bit change. I can put both patterns in the carving list, but it only does the larger shallow carve and skips over the smaller deeper carve.

  2. #2
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,896

    Default

    If I understand the question, there are a couple of ways to do it. You can use clip carving exclusive or you can also use merge style subtractive from the shallow carving.

    Recommend learning how to use both techniques to really open up a ton of pattern making options.
    Attached Thumbnails Attached Thumbnails 2024-04-14 17_45_23-CarveWright - [Untitled Project].png   2024-04-14 17_45_58-CarveWright - [Untitled Project].png  

  3. #3

    Default

    Thanks very much!

  4. #4

    Default

    Questions and issues are really central. I also started and learned about these situations. Your sharing is very detailed!
    scratch games

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •