Results 1 to 3 of 3

Thread: Simple Wireless Phone Charger Base

  1. #1
    Join Date
    Jan 2007
    Loomis, CA

    Default Simple Wireless Phone Charger Base

    This might look like a block of wood, but it's a wireless phone charger. It's a simple carve with a cavity underneath to hold the coil and circuit board. There is a cut out for the USB charging plug. There's a hole so that you can see the charging LED status. The circuit board is from Adafruit in New York. Here is the link:

    Sometimes the coil is on a circular base rather than a square one. So I carved two different bases. I've made two of these now and they seem to work great. I know it works on iPhones with a thin case, but thick cases won't work. Not sure on Androids but if they support the Qi charging standard it should work. I also made a sled so carving future ones won't waste too much wood. I just used a satin varnish for the finish as I wanted the "block of wood on the desk look" ( what does it do?) On the photo you can see where I used the wrong screws for the circuit board and they came through. On the second one I made I used shorter screws! You could just use small stand-offs glued to the base then the board can be screwed into them.

    Click image for larger version. 

Name:	IMG_5206.jpeg 
Views:	15 
Size:	1.86 MB 
ID:	88935Click image for larger version. 

Name:	IMG_5207.jpeg 
Views:	15 
Size:	1.92 MB 
ID:	88934Click image for larger version. 

Name:	IMG_1032.JPG 
Views:	15 
Size:	1.85 MB 
ID:	88936

  2. #2
    Join Date
    Feb 2007
    Southern Delaware


    Looks like you've found an answer for the need of a convenient charging place. Not sure if Android has the technology either but it is an obvious fix for those that need one. Shows what thinking out of the box can do.
    Rock H

  3. #3
    Join Date
    Apr 2014


    Very cool. Thinking inside the box.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts