Results 1 to 3 of 3

Thread: Carve Region with 1/8" cutting bit

  1. #1
    Join Date
    May 2009
    Location
    Lawton, OK
    Posts
    483

    Default Carve Region with 1/8" cutting bit

    I know this has been covered before, but I can't seem to find it. Can I carve a region with the 1/8" cutting bit? There are no patterns inside the carved region, and I want to know if I can do this mainly as a time saving feature. I'm doing several large rectangles that will have other items glued into the carved areas at a later time. Working with the 1/16" carving bit takes forever carving these regions and leaves a tapered side, I was hoping there would be a way to speed up the process with the 1/8" bit.

    John

  2. #2
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,877

  3. #3
    Join Date
    May 2009
    Location
    Lawton, OK
    Posts
    483

    Default

    Perfect, Thank you.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •