Results 1 to 1 of 1

Thread: Y Axis jogs in Carving Project

  1. Default Y Axis jogs in Carving Project

    Click image for larger version. 

Name:	IMG_20220103_155107152.jpg 
Views:	7 
Size:	1.88 MB 
ID:	88843Click image for larger version. 

Name:	IMG_20220103_155028862.jpg 
Views:	10 
Size:	1.65 MB 
ID:	88844Project size 12" x 16"
    Board size 14" x 36"
    I have cut this project twice now with similar results both times. As the carving gets near the end of the carving area (2-4 inches) it begins jogging the carving to the left on the Y Axis by about 1/8" increments. What could be causing this?
    Last edited by DHostetler; 01-21-2022 at 10:17 AM. Reason: add photos

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •