Finished my first 4 projects. Now starting my next batch.....but.....
Getting VERY tried of spending time with this machine. Have double checked all the suggestions from last time. Board is fine. Masking tape on.
Have found two issues that werent there last time with this error.
Board sometimes gets hung in the black squaring plate cutout for the brass tracking roller and then gets crooked. (That may have been the "jerk" I saw last time)
Also the machine is measuring a 24 inch board at 17.1 inches and not the 24. The board is 14 inches wide.
Compression rollers are dropping. Have cleaned everything multiple times and the machine has not carved yet.
Any more thoughts, before I give up?