Results 1 to 4 of 4

Thread: arced carve region

  1. #1

    Default arced carve region

    I am at a loss as to how to make an arced carve region. No problem with designing a 1/4"x1/4"x5" long carved region but I really need one that is in an arc as apposed to a straight line. I can't find the right set of tools to do this. Any advice is very welcome.

  2. #2
    Join Date
    Dec 2014
    Location
    Kaukauna, Wisconsin
    Posts
    562

    Default

    Hope post on in the other thread helps. If not let us know.

    Copied and pasted your comments for his other post because I will be deleting it..

    Let us see if this helps. Put your first arc on the board. Now put the second side of the arc on the board. Now click edit, select all. Now connect the two arcs at the points. Once a carve region can be made. Hope this helps.
    Last edited by fwharris; 05-10-2021 at 11:20 AM.

  3. #3
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,930

    Default

    A carve region needs to have a closed path, all lines connected. Are you closing the arc?

    Note: you should not double post your questions. I will delete your other post.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  4. #4

    Default

    Sorry, been gone. Thank you for the reply. I'm heading for the shop ASAP. Very much appreciated!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •