Results 1 to 4 of 4

Thread: Clear board sensor error

  1. Default Clear board sensor error

    I need your help. I keep getting the clear board sensor error. I have done everything the trouble shooting guide suggests to do. I've talked to the tech people at CW half a dozen times. After checking everything they tell me to check, they say it has to be a problem with my board. Since they say the board senor is reading correctly. Well I've tried 3 different projects using 3 different boards, cypress, maple, and cherry. And I STILL get the board sensor error message. Any other suggestions as to what is causing my problem?? Thanks.

  2. #2
    Join Date
    Dec 2010
    Location
    Coeur D'Alene Idaho
    Posts
    683

    Default

    What exactly is the machine doing when you get error message?

  3. Default

    The machine starts to measure the board. It measures the width just fine. But when it gets to "beginning" of the board it stops and gives me the "clear board sensor" error message.

  4. #4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •