Results 1 to 3 of 3

Thread: Clear board sensor

  1. #1
    Join Date
    Dec 2013
    Location
    Hartland, Michigan
    Posts
    9

    Default Clear board sensor

    Hi...

    I found this in one of the posts...

    For the future, since every board is a different color... Use a piece of white copy paper on the board and crank the head down and measure the Board Sensor. A 156 is perfect a 90 is a dirty window.

    I am getting a 14 - 12 (it starts at 14 and goes down to 12).

    What is that telling me?

    Thanks...

  2. #2
    Join Date
    Dec 2013
    Location
    Hartland, Michigan
    Posts
    9

    Default

    Never mind... I put masking tape on the piece of walnut and all is fine. Thanks...

  3. #3
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Good Job. It is all about reflective light off the board... Dark wood reflects less... That is why the paper as a standard. Looks like my post....156...
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •