-
Carving only part of an oval
I used an oval to get the correct curve for a project. However, the machine during the carve will carve a straight line on the edge and at the end of the board for the part of the oval that isn't on the board. See attached jpg. The red line indicates the carve that happens. It's about a 1/16" in on the board. Any suggestions on how to fix this? I really don't want to do a line with a bunch of points to do the bend. It'll never be a smooth curve.
I've also attached a simple sample project that has the oval.
Thx
sample.mpc
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules