Page 1 of 2 12 LastLast
Results 1 to 10 of 53

Thread: And now for something completely different.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default And now for something completely different.

    Golf carts are a popular neighborhood vehicle here in Florida, even though strictly speaking they are not street legal. I picked up this project cart for a song.

    Click image for larger version. 

Name:	before.jpg 
Views:	68 
Size:	939.3 KB 
ID:	88154

    The "bones" of this 30+ year old cart - motor, differential, aluminum frame - are in good shape, but the rest not so much. I stripped the hideous homemade "body" from it, cleaned up and repainted the brake and accelerator pedals and linkages and electrical parts, replaced many rusted fasteners with stainless steel, installed new brake shoes and brake cables, new shocks, new batteries, new solenoid, new microswitches, and all new wiring.

    Click image for larger version. 

Name:	electrical.jpg 
Views:	47 
Size:	935.8 KB 
ID:	88155

    I added a temporary seat base and floorboard to test the rolling chassis, which is working well.

    Click image for larger version. 

Name:	bones.jpg 
Views:	55 
Size:	1.35 MB 
ID:	88156

    I replaced the temporary floorboard with a new one.

    Click image for larger version. 

Name:	floorboard.jpg 
Views:	49 
Size:	1.03 MB 
ID:	88157

    Also added an under seat panel and shift knob. The black thing is a charging jack.

    Click image for larger version. 

Name:	shiftknob.jpg 
Views:	53 
Size:	812.2 KB 
ID:	88158

    More to come, as this is a longer-term project.

  2. #2
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    Get that baby all tricked out! Looking forward to seeing your process!
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  3. #3

    Default

    I want this cart to be unique.

    There are a few companies making fiberglass golf cart bodies of classic cars - '57 Chevys, Jeeps, Ford Broncos. I thought about getting one, but they are a bit pricey. I decided to make my own, out of wood of course. It will not be painted but will be a true "woody". I was looking for a body that would be recognizable and also have some interesting detail. I decided to go with the early Ford Bronco for the fender and grill details. Something like this.

    Click image for larger version. 

Name:	golf Bronco.PNG 
Views:	48 
Size:	1.67 MB 
ID:	88159

    In addition to Bronco photos, I got a plastic model kit of an early Ford Bronco to study. I tried scanning the hood, but the results were disappointing. The scan yielded a very irregular surface that the de-noise and smoothing filters of Pattern Editor could not overcome. I would need to build my own models. I don't have 3D modeling software per se, and no skills with such tools, but I do have some Designer add-ons.

    I don't have the 2D Designer add-on, but did something similar, tracing a nice side photo of a Bronco with a paint program to get the shapes of a front fender. The resulting line drawing that I made was imported as a pattern, and I traced that with the line drawing tools in Designer. I used a 1/2 size scale in Designer to make the fender model - about 11" tall and 19" wide, to fit a virtual single board, to scale up to twice that when carved. I used 3D tools to build up the fender shapes, staring with the Sweep- Rounded tool on the fender flare.

    Click image for larger version. 

Name:	fender lip.PNG 
Views:	34 
Size:	92.8 KB 
ID:	88160

    To taper the ends of the flare, I "bent" the flare around a rectangular carve region shaped with the Extrude tool using Merge Additive.

    Click image for larger version. 

Name:	flare bend.PNG 
Views:	26 
Size:	169.9 KB 
ID:	88165

    I made this into a pattern and loaded it into Pattern Editor. By lowering the pattern, I eliminated the rectangular carve region, leaving a taper in the lower part of the fender flare.

    Click image for larger version. 

Name:	fender lip lower bend before.PNG 
Views:	26 
Size:	162.2 KB 
ID:	88161 Click image for larger version. 

Name:	fender lip after.PNG 
Views:	26 
Size:	135.5 KB 
ID:	88162

    The process was repeated on the front of the flare with a different swept carve region. The top of the fender was built up separately. The whole fender with flare was also bent with an underlying swept carve region to produce the end result pattern. Pattern Sculptor was also used to smooth out and further blend the fender flare into the fender.

    Click image for larger version. 

Name:	final fender.PNG 
Views:	36 
Size:	116.7 KB 
ID:	88163

    The final pattern was scaled up to size and placed on two 12" wide boards, ready for machining as soon as I get some lumber. To keep machine time down, I plan to run this carving with the 3/16" ballnose bit in Draft mode. Any vertical lines can quite readily be sanded out, as the fender is quite smooth.

    Looking forward to designing the grill.

    Click image for larger version. 

Name:	cfb-ford-bronco-woodie.jpg 
Views:	28 
Size:	199.5 KB 
ID:	88164

  4. #4
    Join Date
    Feb 2009
    Location
    Western New York
    Posts
    899

    Default

    Awesome Project! I am looking forward to following this thread as the process continues! Thanks for the detailed updates!

  5. #5

  6. #6
    Join Date
    Aug 2013
    Location
    Kiel, Wisconsin
    Posts
    273

    Default

    Very cool! Looking forward to your progress.

  7. #7
    Join Date
    Feb 2009
    Location
    Western New York
    Posts
    899

    Default

    Looking good!!

  8. Default

    Great work!

    So impressed with your attention to detail. Great job using the tools you have on hand. Can’t wait to see the final product!


    Sent from my iPhone using Tapatalk

  9. #9

  10. #10
    Join Date
    Feb 2007
    Location
    Southern Delaware
    Posts
    1,039

    Default

    Looks better all the time. Know it's still a ways off but am curious whether your are going to stain it, paint it or maybe use aniline dyes for the finish.
    Rick H

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •