Results 1 to 6 of 6

Thread: Tracking sensor not working board falls out?

  1. Default Tracking sensor not working board falls out?

    Hi All,

    I had for gotten about the 7in rule, so My board is 24x11.5x.074, The board I want to make is 15 x 10? I do not understand why the board keeps falling out? Am I missing something else? Please. I am trying to understand, I have made at least 20 other boards with no problem? I would greatly appreciate any help you can send my way. I just received the how to make a jig this morning I guess that is what I need?

    Thank you
    Loriblackdog

  2. #2
    Join Date
    Dec 2010
    Location
    Coeur D'Alene Idaho
    Posts
    653

    Default

    I'm not sure what you mean by "the board keeps falling out". If you mean when the machine is measuring the board and it just keeps running and spits it out when it gets to the end then you have a stuck roller switch. If that is the case do a sensor check and see if both rollers are showing open when there is no board in the machine..

  3. #3
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,835

    Default

    You have a stuck compression roller. Do as Dale said, do a compression roller sensor check.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  4. #4
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,930

    Default

    The Compression Roller is important like Floyd pointed out... It wakes up the board sensor... If no compression roller drop... board sensor never comes on and board drives out of the machine.... Do a sensor check... Crank down on a board and look at the rollers... Un crank and see if the status changes.... Dust builds up on the resting plate of the roller. And it can't drop far enough to let the switch fall into the slot.
    Attached Thumbnails Attached Thumbnails DSC01042.JPG   DSC01043.JPG   DSC01043_WEB.jpg   DSC01040_WEB.jpg  

    DSC01044_WEB.jpg  
    Last edited by Digitalwoodshop; 02-16-2020 at 09:25 PM.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  5. #5

    Default

    This happened to me as well but in my case the wood was too dark (pre-stained). I used a piece of natural wood as a test, and it worked fine.

  6. #6
    Join Date
    Dec 2014
    Location
    Kaukauna, Wisconsin
    Posts
    510

    Default

    [QUOTE=Mike1;274049]This happened to me as well but in my case the wood was too dark (pre-stained). I used a piece of natural wood as a test, and it worked fine.[/QUOTE
    When I use wood to dark for the sensor to pick up on, I put masking tape in a T pattern where the sensor travels.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •