Results 1 to 6 of 6

Thread: Centerline depth issues

  1. #1
    Join Date
    May 2010
    Location
    Arlington, TX
    Posts
    25

    Default Centerline depth issues



    I am using centerline text to make blocks and the depth of the carving gets shallower in one corner. I have ensured that the bold is not selected for any of these letters and the blocks are all within a .5 millimeter in size (all 4cm cubes).

    Any insight is helpful.

    Regards, Doc


    Sent from my iPhone using Tapatalk
    Regards,
    Doc

  2. #2
    Join Date
    May 2010
    Location
    Arlington, TX
    Posts
    25

    Default



    So on this run I jogged to the shallow corner and it made it deeper but the rest as well. So logic tells me that corner is lower, but I have measured and it’s not. While writing this post I think I might have worked it out. My sled does not extend 3” past the carving. So the deep side is getting tilted up. I’m going to fix that and let ya all know (well if anyone cares [emoji12].


    Sent from my iPhone using Tapatalk
    Regards,
    Doc

  3. #3

  4. #4
    Join Date
    May 2010
    Location
    Arlington, TX
    Posts
    25

    Default

    Quote Originally Posted by DickB View Post
    3.5" at least. I use 4" 'cause I don't like fractions.
    So you agree that could cause that? Seems odd that it affects the last ‘row’ versus the last ‘column’?


    Sent from my iPhone using Tapatalk
    Regards,
    Doc

  5. #5
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    The head might not be level from the key pad end to the bit plate end.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  6. #6
    Join Date
    May 2010
    Location
    Arlington, TX
    Posts
    25

    Default

    Quote Originally Posted by fwharris View Post
    The head might not be level from the key pad end to the bit plate end.
    Thank You. I’ll look for the details on how to check & adjust that.


    Sent from my iPhone using Tapatalk
    Regards,
    Doc

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •