Results 1 to 10 of 10

Thread: Help with a project

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Help with a project

    Hello everyone, I am having trouble with my software working correctly and I was wondering if anyone could help me by designing a small project for a remodel project in our small town museum.
    I am looking to have a block designed to go in the corners of our woodwork around the doors and windows. it would just need to be 5 inches by 5 inches and have a older train and the works Table Rock Nebraska around it.
    Please message me if you are interested in helping.
    Thanks!

  2. #2

    Default Table Rock

    Maybe this will get you started and the kind folk here can edit it.
    Attached Files Attached Files

  3. #3
    Join Date
    Apr 2014
    Location
    Texas
    Posts
    2,145

    Default

    Mike, that is sharp looking. Nicely done.

    -Oscar

  4. #4

    Default

    Thank you Oscar.

  5. #5
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    here is my idea, I like draft and lower height allittle just me version
    Attached Files Attached Files
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  6. #6
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,840

    Default

    My opeion - I like Myshop's version but I would space the letters a little.
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

  7. #7
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default

    Quote Originally Posted by cestout View Post
    My opeion - I like Myshop's version but I would space the letters a little.
    Clint
    I agree about the spacing, I didn’t have much time to work with it, if we have “ variable draft” , we could do some fine tuning too
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  8. #8

    Default

    Thanks to both of you for the help, unfortunately I cannot get either to work with my software I guess. The first one when I try and upload it says, I have unlicensed features, centerline and unconfirmed vectors. The second pattern says I do not have the correct version of software. I have just the basic version of the software and it is updated. Any ideas?

  9. #9
    Join Date
    Jan 2008
    Location
    New Iberia, la.
    Posts
    1,866

    Default Table rock

    Quote Originally Posted by tablerock View Post
    Thanks to both of you for the help, unfortunately I cannot get either to work with my software I guess. The first one when I try and upload it says, I have unlicensed features, centerline and unconfirmed vectors. The second pattern says I do not have the correct version of software. I have just the basic version of the software and it is updated. Any ideas?
    What version of software are you using, if I open the mpc in 3.1? And saved it and you are using a lesser version, then you can open it.
    My Shop 1044

    CarveWright START U Team Member

    V - 1.187 and 3.0 too
    With the DC Insert," dust all gone"
    CarveWright Customer Documentation http://www.carvewright.com/2010CWweb/maintenance.htm
    CarveWright Tips and Tricks http://www.carvewright.com/2010CWweb/tips.htm
    www.customcarvingsbyperry.com
    I have often wondered why it is that
    Conservatives are called the "right" and Liberals are called the "left".
    "The heart of the wise inclines to the right, but the heart of
    the fool to the left."

  10. #10
    Join Date
    Aug 2008
    Location
    The Great Texas Gulf Coast
    Posts
    5,331

    Default

    MPC files saved in newer versions cannot be opened in earlier versions. Earlier versions can all be opened in newer versions. They are not backward compatible.
    CarveWright CX Packaged System - starting at $2000
    CarversClub 1 Year Subscription - $150.00/year
    Adv. Support w/out CC membership - $25.00/issue
    CarveWright Community Forum - PRICELESS!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •