Results 1 to 6 of 6

Thread: 60 v bit letter

  1. #1
    Join Date
    Mar 2009
    Location
    Amarillo Tx
    Posts
    22

    Default 60 v bit letter

    I have basic software, with center-line. Can't figure out how to use 60 v bit to carve text.

  2. #2

    Default

    Highlight the words you want to use a *V* bit for then go to the *tool bar* and choose *Bit Select*, choose whatever bit you would like to use.

  3. #3
    Join Date
    Mar 2009
    Location
    Amarillo Tx
    Posts
    22

    Default

    Do I need to choose center line, outline, or raster. I programmed one raster and no feather and one in center line. Will carve this week end to find out. Thanks for info.

  4. #4
    Join Date
    Aug 2008
    Location
    north ont Canada
    Posts
    2,365

    Default

    Quote Originally Posted by tpf3 View Post
    Do I need to choose center line, outline, or raster. I programmed one raster and no feather and one in center line. Will carve this week end to find out. Thanks for info.
    would love to help you but if you had team viewer on the desk top and phone you or you phone me I could help send me a private massage and go from there
    I
    Henry

    Every one has a photographic memory. Some just don't have film.

  5. #5

    Default

    Click on Centerline in the text box area then *Conform* in the tool selection area.

  6. #6
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Bigger Text will require a V90 Bit.
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •