Results 1 to 4 of 4

Thread: Circles with a blip

  1. #1

    Default Circles with a blip

    0 Not allowed!
    Using the drill tool to cut 2 circles. One is 2.75 dia. the other is 2.375. Looking at the attached picture both circles have a blip. Any ideas whats causing the blip?Click image for larger version. 

Name:	thumbnail_IMG_0589.jpg 
Views:	21 
Size:	260.6 KB 
ID:	87486

  2. #2
    Join Date
    Nov 2008
    Vancouver Island


    0 Not allowed!
    My first thought would be something is loose. Wiggle the bit by hand to see if there are some loose bearings on the truck. Did the hole diameters turn out right?

  3. #3
    Join Date
    Sep 2008


    0 Not allowed!
    Or maybe zoom in that area on your pattern or try "Toggle Non-endpoint".
    You may have inadvertently left a stray node in your design.

    Justin Pierce, aka spalted
    *Pattern Editor (Probe) * Centerline * Dxf Import * STL Importer * Version 3 Standalone * Advanced 3D * Advanced 2D * Conforming Vectors * Rotary *C Machine *Rock Chuck

  4. #4


    2 Not allowed!
    It may have been a stray node. I started from scratch with a new board on the computer and the blip disappeared.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts