Right in the middle of a carve, actually at 60% completion, I raised the cover to stop the carve in order to use another tool on the same electric circuit without jeopardizing my carve. (I've done this on numerous occasions without any problem.) When I close the cover the message to press Enter appears, but when I press Enter nothing happens. The display reads "60%" and the spindle just sits there, no spin-up and no movement. I let it sit for 10 minutes and nothing happened. I raised the cover and left everything as it was to see if anyone knows how to get the machine to continue. This is the third carve since replacing the FFC cable, if that matters.
Any ideas???