Connie, you are right. By putting in that one extra space for each line you want to be moved down it works. I have 1.187 - works by just using the "enter" key for each space you want down. But, in 2.0 and up you will have to add the space bar space once and then the enter key for it to move the text down the required spaces. Seems odd that they reprogramed the software so you have to take that extra step. But, then again, you can see how long it's been since I used this feature. And I won't have done it then if another carver hadn't brought it to my attention. Thanks, everyone for the information.