When do a pattern we get to load board, it will not let us go any farther than this point. we also have tried to measure board and we can not get it to read anything after we load the board please advise
When do a pattern we get to load board, it will not let us go any farther than this point. we also have tried to measure board and we can not get it to read anything after we load the board please advise
If it asks you to Load Board, the roller switches have not both closed. Either the head is not cranked down enough or one of the roller switches is not closing. Listen for the roller switches to both click as you crank down the head.
I want to thank everyone for there input. Found that the bracket holding the switch on the compression roller had fallen off
Glad you found the issue with the machine.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
Glad you found it and thanks for reporting what the problem was, that helps everyone!