Results 1 to 5 of 5

Thread: loading board

  1. #1

    Default loading board


    0 Not allowed!
    When do a pattern we get to load board, it will not let us go any farther than this point. we also have tried to measure board and we can not get it to read anything after we load the board please advise

  2. #2
    Join Date
    Nov 2008
    Location
    Vancouver Island
    Posts
    8,157

    Default


    0 Not allowed!
    If it asks you to Load Board, the roller switches have not both closed. Either the head is not cranked down enough or one of the roller switches is not closing. Listen for the roller switches to both click as you crank down the head.

  3. #3

    Default


    0 Not allowed!
    I want to thank everyone for there input. Found that the bracket holding the switch on the compression roller had fallen off

  4. #4
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,624

    Default


    0 Not allowed!
    Glad you found the issue with the machine.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  5. #5
    Join Date
    Dec 2010
    Location
    Coeur D'Alene Idaho
    Posts
    624

    Default


    1 Not allowed!
    Glad you found it and thanks for reporting what the problem was, that helps everyone!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •