Results 1 to 5 of 5

Thread: Cursive Problem in Raster

Hybrid View

  1. #1

    Default Cursive Problem in Raster


    0 Not allowed!
    8 I'm trying to cut out a name in cursive using raster. The problem is the cut out looks like is trying to do it with a v-groove bit instead of a 1/8 straight cutting I'm selecting. How do I fix this? New to this.
    Attached Thumbnails Attached Thumbnails Maksim.JPG  

  2. #2
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,627

    Default


    0 Not allowed!
    I think what you are seeing a the V groove is the feathering around the text.
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

  3. #3
    Join Date
    Dec 2014
    Location
    Kaukauna, Wisconsin
    Posts
    464

    Default


    0 Not allowed!
    Not sure if Floyd addressed your issue or not can only hope,but another thing you could look at is in the cutout menu there is an inset feature that allows you to move the cutout line in or out depending on what you are in need of.

  4. #4

    Default


    0 Not allowed!
    Delete the text after you have outlined it. Looks like you should Flip Cut also.

  5. #5
    Join Date
    Sep 2008
    Location
    Nuevo, CA
    Posts
    1,838

    Default


    0 Not allowed!
    but as a novice, just so you understand, on your original project -select the text and select no feathering. Default for raster text is feathered. Then do as Dick says.
    Clint
    CarveWright StartU team member
    Web Site WWW.clintscustomcarving.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •