I can not figure out what is going on. The carve started out OK, but at 20% the bit started taking a gradual plunge and finally ended with an X error.
Can't find anything obviously wrong and just did the 750 hr maintenance about 20 hrs ago.
Any suggestions would be appreciated and Happy New Year to all fellow carvers.

Mike


Click image for larger version.  Name: DSC_9232.JPG  Views: 26  Size: 2.45 MB  ID: 87013Click image for larger version.  Name: DSC_9233.JPG  Views: 24  Size: 3.31 MB  ID: 87014