Results 1 to 10 of 18

Thread: Litho Text Depth.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Litho Text Depth.

    Hi all, just wondering how to set the depth for lettering for a 1/4" litho with a 3/4" sled. I would like no more than 1/8" but I believe that it is pre set to 1/4". I know I can trick the CW but would prefer to learn how to do it another way. Kinda under the gun here.Thank you.

  2. #2
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Have you tried typing in various Depth and Height values for your text to see what the preview looks like? (Do you have Designer Pro with the Litho Preview capability?)
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  3. #3

    Default

    1.187 only, thank you

  4. #4
    Join Date
    Aug 2008
    Location
    north ont Canada
    Posts
    2,365

    Default

    Quote Originally Posted by Mike1 View Post
    1.187 only, thank you
    will call you tomorrow and will show you how its ok
    Henry

    Every one has a photographic memory. Some just don't have film.

  5. #5
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    Quote Originally Posted by Mike1 View Post
    1.187 only, thank you
    Ok. Just select the text then type in numerical values in either the Depth or Height boxes until you get the text “look” you want. For example, the default height is “100”. Type in “50” to reduce the text height by half. Type in “25” to reduce by 1/4, etc
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  6. #6

    Default

    will not allow me to do that

  7. #7
    Join Date
    Dec 2006
    Location
    Brunswick, GA
    Posts
    8,123

    Default

    You have "actual" text, right? (not some imported graphic!) ...and you are selecting the text so that the Depth and Height boxes are active?

    Please post your MPC here, or at least a screenshot so we can see exactly what you are doing.
    Michael T
    Happy Carving!


    ═══ Links to Patterns & Resources for CompuCarve™ & CarveWright™ ═══

  8. #8
    Join Date
    Sep 2007
    Location
    Northern Colorado
    Posts
    7,962

    Default

    If you are doing the text as centerline you can verify the depth of cut by zooming on the text and holding your cursor of the deepest part of the text. On the bottom left of the designer screen the depth will show up as the last number. Also make sure you set your design board thickness to 1/4".
    RingNeckBlues
    My patterns on the Depot
    DC-INSERT It Just Sucks!

    Proven to out perform all others!
    Buy CarveWright
    Colorado FaceBook Users Group


    All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •