Results 1 to 3 of 3

Thread: QC accessories available

  1. #1
    Join Date
    Mar 2017
    Location
    Cypress, Texas
    Posts
    46

    Default QC accessories available

    I upgraded to the Carvetight Z truck. I thought it was a problem however the problem turned out to be the encoder in the motor. This is a used Z truck set up for quick change. It works well. It has 180 hours on it. The belt is in good shape. I have two 1/16 carving bits and one 1/16 cutting bits, one extra 1/16 carving and two extra collets. One bit is missing the side nuts. If you will pay for shipping or stop to pick them up I will pass them on. Send me a message. Vicki
    Click image for larger version. 

Name:	IMG_3810.JPG 
Views:	23 
Size:	93.2 KB 
ID:	86496Click image for larger version. 

Name:	IMG_3809.JPG 
Views:	23 
Size:	87.9 KB 
ID:	86495Click image for larger version. 

Name:	IMG_3808.JPG 
Views:	24 
Size:	79.7 KB 
ID:	86494Click image for larger version. 

Name:	IMG_3811.JPG 
Views:	24 
Size:	76.8 KB 
ID:	86497Click image for larger version. 

Name:	IMG_3812.JPG 
Views:	25 
Size:	101.4 KB 
ID:	86498

  2. #2
    Join Date
    Jan 2007
    Location
    NE PA USA
    Posts
    9,984

    Default

    Vicki,

    I will take all the parts and bits. I will PM you.

    Thanks,

    AL
    Favorite Saying.... "It's ALL About the Brass Roller"..... And "Use MASKING TAPE" for board skipping in the X or breaking bits.

    Follow ME on Facebook http://www.facebook.com/pages/Accoun...50019051727074

    www.PoconoDigitalWoodshop.com

    www.AccountabilityTag.com


  3. Default

    Do you still have the bits? I need 1/4 inch Collettes and bits.

    Thanks,
    Yvonne

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •