Little things I learned
Hello guys, longtime user, occasional lurker. I just wanted to share some tips with you guys that I have learned and done over the years since I learned a lot when first starting out by just reading your guys tips.
On the Belt Trays I used Teflon tape on the aluminium top base. Less friction and wearing of the aluminum and the belts run smother. Sawdust doesn't seem to get under belts and wear the aluminum. I had already upgraded on all my machine's to rubber, but imagine it will work equally as well with the older sandpaper belts. I replaced the tracking damper screw with a standoff from a computer board. No more lost damper when I blow the machine out. Lot less tracking errors on boards also.
Hundreds attend Global Warming Protest!!!