Results 1 to 4 of 4

Thread: Help Identifying 3 bits I have

  1. #1
    Join Date
    Mar 2017
    Location
    Cypress, Texas
    Posts
    46

    Default Help Identifying 3 bits I have

    I was doing an inventory of my bits and found three I can't find on the products section. These are itty bitty - The far left one is about 1/2" long and was marked BCT062A -

    Any ideas what these are?
    Click image for larger version. 

Name:	IMG_3751.JPG 
Views:	72 
Size:	125.6 KB 
ID:	86261

  2. #2
    Join Date
    Feb 2008
    Location
    Tucson, Arizona
    Posts
    2,399

    Default

    The one on the left appears to be a broken 1/8" cutting bit with a CT adapter. Probably not usable. The one on the right is a standard 1/16" carving bit. To use it in the CW you will need a sleeve or adapter. The one in the middle appears to have an adapter for another system and is not usable on the CW.
    Last edited by SteveNelson46; 07-14-2018 at 10:01 AM.
    Steve

  3. #3
    Join Date
    Oct 2009
    Location
    Ohio
    Posts
    1,662

    Default

    The one in the middle is a bit (end mill) that is pushed into the cap of the container that it came in, it's plastic but not sure what bit size really is, some kind of end mill, I've got lots of different end mills that I used when I worked in the machine shops. Guessing it's like 3/32" dia end mill with maybe a radius on the corners, hard to tell from the picture.
    CarverJerry

    ver. 1.187 Win 7- 64b with 6 GB ram @ 2.8Ghz and dual 1Tb hard drives. Rock Chuck & Ringneck vacuum system hooked up to a 1.5hp Cincinnati drum vacuum. Center line text, conforming vectors.

  4. #4
    Join Date
    Mar 2017
    Location
    Cypress, Texas
    Posts
    46

    Default

    It's crazy but the one on the left is brand new - has the wax on the end. It has the number of a 1/8 cutting bit but with an A at the end instead of the P as sold.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •