ROGERS1.mpc trying to figure out how to load carve the names without chunks being knocked out
ROGERS1.mpc trying to figure out how to load carve the names without chunks being knocked out
Have you tried applying some draft to the text?
I made some minor adjustments in the heights, depths, draft, bit resolution, and removed all of the merges. I think this will carve better.
You can convert the raster text to centerline but you will need the Conform Vectors add-on to control the depth.
Last edited by SteveNelson46; 05-16-2018 at 04:00 PM.
Steve
If you want to carve the text as "centerline" you need to edit and change the carve mode to centerline and select the conform box.
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.
I tried the pattern and when I changed it to centerline the names went away , it also says I need a license to use the conform option . What program do I need for that?
They went away because the centerline text was in/on a carve region. Centerline is designed to carve on the top surface of the board. With conform it allows you to place centerline or any other type of vector below the surface of the board. Conform is an add of feature.
http://store.carvewright.com/product...cat=252&page=1
RingNeckBlues
My patterns on the Depot
DC-INSERT It Just Sucks!
Proven to out perform all others!
Buy CarveWright
Colorado FaceBook Users Group
All patterns and projects that I share on the CarveWright forum are for your personal carving purpose. They are not to be shared, sold or posted on any other web site without permission from RingNeckBlues Designs.